Saturday, December 15, 2007

Capture or Record Video from Integrated Webcam

Capture or Record Video from Integrated Webcam

Acer Crystal Eye Application
Someone ask me how to record video using Acer integrated webcam ?
Don't worry, I'll show you that we can record video from Acer integrated webcam and it's so easy to do :) (Windows XP)

1. Click "Start" > "All Programs" > "Windows Movie Maker"

2. On the Windows Movie Maker Movie Tasks click Capture from video device


Click to capture from device
3. In Available devices, click the analog device you want to use to capture video, and then, in the Video input source list, click the input line you want to use, then click Next.

I use "Realtek HD Audio Input" as Audio Device and "Mic Volume" as Audio Input source (Aspire 4710)


In Available devices, click the analog device you want to use to capture video, and then, in the Video input source list, click the input line you want to use, then click Next.

4. In the Enter a file name for your captured video box, enter a file name for your captured video file. Then, in the Choose a place to save your captured video box, select the location where you want your video to be saved or click Browse to select a location. click Next


5. On the Video Setting page, select the video setting you want to use for capturing video and audio.



Available settings :

* Video for Pocket PC (218 Kbps)
* Video for Pocket PC (143 Kbps)
* Video for Pocket PC (Full screen 218 Kbps)
* High quality video (large)
* High quality video (small)
* Video for local playback (2,1 Mbps)
* Video for local playback (1,5 Mbps)
* Video for LAN (1,0 Mbps)
* Video for LAN (768 Kbps)
* Video for broadband (512 Kbps)
* Video for broadband (340 Kbps)
* Video for broadband (150 Kbps)
* Video for ISDN (48 Kbps)
* Video for dial-up access (38 Kbps)


Typically, a higher bit rate will result in higher-quality video with smoother motion. However, as the bit rate increases, so does the size of the captured video file.


6. To prevent the video into smaller clips after the wizard completes and the video is captured, do not select the Create clips when wizard finishes check box,

To prevent audio from playing over your speakers while capturing video, select the Mute speakers check box.

To automatically stop capturing after a time period has elapsed, select the Capture time limit check box, and then type or select the length of time you want to capture. Time is displayed in the form of hours:minutes(h:mm).

To begin capturing, click Start Capture.


7. To stop capturing, click Stop Capture.

If you have selected the Capture time limit check box, wait for the specified amount of time for video to be captured.

Done! :)